|
|
|
National Stock Number:
3040-00-817-4360
Federal Supply Class:
3040
National Item Identification Number:
008174360
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 7073860P1 | 03538 | LOCKHEED MARTIN CORPORATION | | 7073860P1 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1870 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.187 INCHES NOMINAL | | OVERALL LENGTH | 1.730 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DISTANCE FROM END TO GROOVE | 0.160 INCHES NOMINAL | | SECOND END DIAMETER | 0.1240 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.1050 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0190 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 3 |
|
|