| CASING MATERIAL | STEEL |
| CASING SURFACE TREATMENT | ZINC COATED |
| CASING LENGTH BETWEEN FERRULES | 109.000 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.360 INCHES NOMINAL |
| END CONNECTION TYPE | SHOULDERED FERRULE BOTH ENDS |
| END OVERALL DIAMETER | 0.593 INCHES NOMINAL BOTH ENDS |
| SHANK OUTSIDE DIAMETER | 0.500 INCHES NOMINAL BOTH ENDS |
| SHOULDER OUTSIDE DIAMETER | 0.593 INCHES NOMINAL BOTH ENDS |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| WIDTH ACROSS FLATS | 0.438 INCHES NOMINAL BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | STEEL |
| CORE SURFACE TREATMENT | ZINC COATED |
| CORE OVERALL LENGTH | 115.000 INCHES NOMINAL |
| CORE DIAMETER | 0.187 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE |
| END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| TIP LENGTH | 0.437 INCHES NOMINAL BOTH ENDS |
| CROSS SECTION SIZE AND LOCATION | 0.406 INCHES NOMINAL DIAMETER BOTH ENDS |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| SPLINE TYPE | INVOLUTE BOTH ENDS |
| SPLINE QUANTITY | 12 BOTH ENDS |
| SPLINE MAJOR DIAMETER | 0.292 INCHES NOMINAL BOTH ENDS |
| SPLINE MINOR DIAMETER | 0.203 INCHES NOMINAL BOTH ENDS |
| SPLINE LENGTH | 0.250 INCHES NOMINAL BOTH ENDS |
| PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| CORE REMOVABILITY | NONREMOVABLE |
| OVERALL LENGTH | 115.870 INCHES NOMINAL |
| TORSIONAL DEFLECTION RATING | 2 DEG FT-LB WINDING AND 4 DEG FT-LB UNWINDING TORSIONAL DEFLECTION |
| MINIMUM OPERATING RADIUS | 3.500 INCHES |
| FSC APPLICATION DATA | CONTROL INSTL,PRIMARY FLIGHT,WING,AIRFRAME |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 0KZS2 |
| DESIGN CONTROL REFERENCE | LA2672-115 |