|
|
|
National Stock Number:
3040-00-825-0838
Federal Supply Class:
3040
National Item Identification Number:
008250838
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 44544 | 82340 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1870 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.1730 INCHES MINIMUM AND 0.1770 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM | | FIRST END DISTANCE FROM END TO GROOVE | 0.032 INCHES MINIMUM AND 0.052 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 1.958 INCHES MINIMUM AND 1.9788 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD NO. 66,AISI 416 FED STD SINGLE MATERIAL RESPONSE OR SAE 51416 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 416 | | SECOND END DIAMETER | 0.1870 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.1730 INCHES MINIMUM AND 0.1770 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0300 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED | | SURFACE FINISH | 32.0 MICROINCHES |
|
|