| END SIMILARITY | NOT IDENTICAL |
| FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,AIRCRAFT |
| INVOLUTE SPLINE PITCH DIAMETER | 0.2500 INCHES NOMINAL SECOND END, SECOND PORTION |
| INVOLUTE SPLINE LENGTH | 0.500 INCHES NOMINAL SECOND END, SECOND PORTION |
| INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 14.5 SECOND END, SECOND PORTION |
| INVOLUTE SPLINE QUANTITY | 12 SECOND END, SECOND PORTION |
| OVERALL LENGTH | 2.243 INCHES NOMINAL |
| MATERIAL | STEEL |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| SHAFT HARDNESS RATING | 47.000 ROCKWELL C MINIMUM AND 53.000 ROCKWELL C MAXIMUM |
| SPECIAL FEATURES | MATERIAL SPEC MIL-S-5000,COND C OR D |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.3147 INCHES NOMINAL FIRST END, FIRST PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.3147 INCHES NOMINAL SECOND END, FIRST PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.256 INCHES NOMINAL FIRST END, FIRST PORTION |
| STRAIGHT UNTHREADED LENGTH | 0.381 INCHES NOMINAL SECOND END, FIRST PORTION |
| WORM BODY LENGTH | 1.187 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| WORM HELIX ANGLE | 7 DEG 18 MIN 59 SEC |
| WORM OUTSIDE DIAMETER | 0.552 INCHES NOMINAL |
| WORM PITCH DIAMETER | 0.49018 INCHES NOMINAL |
| WORM PRESSURE ANGLE IN DEG | 20.000 |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM THREAD LEAD | 0.19796 INCHES NOMINAL |
| WORM THREAD QUANTITY | 2 |
| WORM THREAD SECTION LENGTH | 0.625 INCHES NOMINAL |
| TEETH HARDNESS RATING | 47.000 ROCKWELL C MINIMUM AND 53.000 ROCKWELL C MAXIMUM |