|
|
|
National Stock Number:
3040-00-832-6393
Federal Supply Class:
3040
National Item Identification Number:
008326393
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 11697062 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4340 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000, COMP 4340, COND C4 MIL SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | PASSIVATE | | STYLE DESIGNATOR | PLAIN ROUND | | OUTSIDE DIAMETER | 2.224 INCHES NOMINAL | | THICKNESS | 1.250 INCHES NOMINAL | | BORE DIAMETER | 1.8040 INCHES NOMINAL | | SURFACE FINISH AND LOCATION | 63 MICROINCHES OVERALL | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 45.0 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED 1ST HOLE | | HOLE DIAMETER AND LOCATION | 0.0930 INCHES NOMINAL 1ST HOLE | | KEYWAY QUANTITY | 1 | | INTERNAL KEYWAY WIDTH | 0.310 INCHES NOMINAL | | DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY | 0.980 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 11697062 |
|
|