|
|
|
National Stock Number:
3040-00-832-9613
Federal Supply Class:
3040
National Item Identification Number:
008329613
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1005008329613 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 1005008329613 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 11013434 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3090 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0390 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.074 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.563 INCHES NOMINAL | | OVERALL LENGTH | 1.030 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1137 | | SECOND END GROOVE DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0970 INCHES NOMINAL | | SECOND END DIAMETER | 0.5630 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.056 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | FIRST END CHAMFERED AT .015 IN.X 45 DEGREES | | STEP QUANTITY | 7 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|