|
|
|
National Stock Number:
3040-00-837-8902
Federal Supply Class:
3040
National Item Identification Number:
008378902
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 8762515 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 9.250 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.750 INCHES NOMINAL | | FEATURES PROVIDED | LINK END THREADED HOLE | | LINK END HOLE DIAMETER | 0.626 INCHES NOMINAL | | LINK END THICKNESS | 1.380 INCHES NOMINAL | | MAJOR DIAMETER | 1.150 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048, COND A/A MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MINOR DIAMETER | 1.141 INCHES NOMINAL | | SCREW THREAD SERIES DESIGNATOR | UNC | | SHAFT END THICKNESS | 1.500 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | OFFSET HEIGHT: 0.065 IN. NOMINAL | | SPLINE QUANTITY | 22 | | STYLE DESIGNATOR | CLEVIS LINK END, SECURING HOLE(S) SHAFT END | | SURFACE TREATMENT | PAINT | | THREAD LENGTH | 0.937 INCHES NOMINAL | | THREAD SIZE | 1/4-20 |
|
|