|
|
|
National Stock Number:
3040-00-854-0262
Federal Supply Class:
3040
National Item Identification Number:
008540262
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2481790 | 99551 | GOODRICH CORPORATION | | APC2481790 | 32970 | AIRCRAFT PARTS CORPORATION | | APC2481790 | 95270 | SKURKA AEROSPACE INC |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM | | FIRST END PITCH DIAMETER | 0.6000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.850 INCHES MINIMUM AND 0.870 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.5000 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 12 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 0.905 INCHES MINIMUM AND 0.925 INCHES MAXIMUM | | OVERALL LENGTH | 2.790 INCHES MINIMUM AND 2.810 INCHES MAXIMUM | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.8620 INCHES MINIMUM AND 0.8670 INCHES MAXIMUM | | SECOND END PITCH DIAMETER | 0.8000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.830 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.8620 INCHES MINIMUM AND 0.8670 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.6710 INCHES MINIMUM AND 0.6990 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 16 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL | | STEP QUANTITY | 5 |
|
|