|
|
|
National Stock Number:
3040-00-860-5970
Federal Supply Class:
3040
National Item Identification Number:
008605970
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3008T42P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.232 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.232 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.2490 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0730 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | FSC APPLICATION DATA | ACTUATORS,JET ENGINE | | LARGEST STEP DIAMETER | 0.499 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | OVERALL LENGTH | 5.430 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.260 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.460 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED HOLE AND SLOTTED | | SECOND END HOLE DIAMETER | 0.0320 INCHES NOMINAL | | SECOND END SLOT DEPTH | 0.110 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.130 INCHES NOMINAL | | SPECIAL FEATURES | FIRST END,SECOND STEP GROOVED WITH DIA 0.2944 IN NOMINAL,WIDTH 0.080,DISTANCE FROM END TO GROOVE 0.210;ENDS CHAMFERED 45 DEG WITH DEPTH OF 0.035 | | STEP QUANTITY | 4 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|