|
|
|
National Stock Number:
3040-00-863-7315
Federal Supply Class:
3040
National Item Identification Number:
008637315
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 65-10523-1 | 7F311 | MONROE MACHINED PRODUCTS, INC. | | 65-10523-1 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 4.000 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.254 INCHES MAXIMUM | | LINK END THICKNESS | 1.066 INCHES NOMINAL | | MAJOR DIAMETER | 1.175 INCHES MINIMUM AND 1.186 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643, 17-4PH ASSN STD SINGLE MATERIAL RESPONSE | | III MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | MINOR DIAMETER | 1.000 INCHES MINIMUM AND 1.008 INCHES MAXIMUM | | SHAFT END THICKNESS | 0.940 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPLINE QUANTITY | 17 |
|
|