| END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| CASING OUTSIDE DIAMETER | 0.235 INCHES NOMINAL |
| CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER |
| CASING SURFACE TREATMENT | ZINC COATED |
| CASING LENGTH BETWEEN FERRULES | 139.500 INCHES NOMINAL |
| CORE DIAMETER | 0.130 INCHES NOMINAL |
| CORE MATERIAL | STEEL |
| CORE OVERALL LENGTH | 140.500 INCHES NOMINAL |
| CORE REMOVABILITY | NONREMOVABLE |
| CORE ROTATION DIRECTION | CLOCKWISE |
| CROSS SECTION SIZE AND LOCATION | 0.406 INCHES NOMINAL DIAMETER BOTH ENDS |
| END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| III CASING MATERIAL | STEEL |
| PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| PROPRIETARY CHARACTERISTICS | PACS |
| MINIMUM OPERATING RADIUS | 3.000 INCHES |
| OVERALL LENGTH | 140.500 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| SPECIAL FEATURES | W/SPLIT COUPLING NUT ONE END OF CASTING |
| SPLINE LENGTH | 0.250 INCHES NOMINAL BOTH ENDS |
| SPLINE MAJOR DIAMETER | 0.296 INCHES MINIMUM AND 0.299 INCHES MAXIMUM BOTH ENDS |
| SPLINE MINOR DIAMETER | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM BOTH ENDS |
| SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| SPLINE QUANTITY | 12 BOTH ENDS |
| SPLINE TYPE | INVOLUTE BOTH ENDS |
| WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL BOTH ENDS |
| WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| THREAD CLASS | 2A BOTH ENDS |
| THREAD DEPTH | 0.375 INCHES NOMINAL BOTH ENDS |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| THREAD LOCATION | INTERNAL BOTH ENDS |
| TIP LENGTH | 0.500 INCHES NOMINAL BOTH ENDS |
| TORSIONAL DEFLECTION RATING | 15 DEG FT-LB IN. |