|
|
|
National Stock Number:
3040-00-869-9287
Federal Supply Class:
3040
National Item Identification Number:
008699287
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 30000761 | 14028 | SYPRIS ELECTRONICS, LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6977 INCHES MINIMUM AND 0.6981 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.697 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 TY 303 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | OVERALL LENGTH | 5.250 INCHES NOMINAL | | SECOND END ANGLE BETWEEN FLATS | 90.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.5115 INCHES MINIMUM AND 0.5117 INCHES MAXIMUM | | SECOND END STEP LENGTH | 0.620 INCHES NOMINAL | | SECOND END STYLE | TWO FLATS | | STEP QUANTITY | 2 |
|
|