|
|
|
National Stock Number:
3040-00-879-4416
Federal Supply Class:
3040
National Item Identification Number:
008794416
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 701596 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1010 OR | | STEEL COMP 1020 | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD 1ST MATERIAL RESPONSE OR | | AISI 1010 ASSN STD SINGLE MATERIAL RESPONSE OR | | SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE AND | | FED STD 66 FED STD 2ND MATERIAL RESPONSE OR | | AISI 1020 ASSN STD SINGLE MATERIAL RESPONSE OR | | SAE 1020 ASSN STD SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | PLAIN ROUND | | OUTSIDE DIAMETER | 0.365 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | THICKNESS | 0.131 INCHES MINIMUM AND | | 0.141 INCHES MAXIMUM | | BORE DIAMETER | 0.1910 INCHES MINIMUM AND | | 0.1930 INCHES MAXIMUM | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED 1ST HOLE | | UNTHREADED 2ND HOLE | | HOLE DIAMETER AND LOCATION | 0.0470 INCHES NOMINAL 1ST HOLE AND | | 0.0616 INCHES NOMINAL 2ND HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99167 | | DESIGN CONTROL REFERENCE | 701596 |
|
|