| MATERIAL | STEEL CORROSION RESISTING |
| TEETH HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND |
| 31.0 ROCKWELL C MAXIMUM |
| SHAFT HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND |
| 31.0 ROCKWELL C MAXIMUM |
| WORM THREAD QUANTITY | 1 |
| WORM PRESSURE ANGLE IN DEG | 14.500 |
| WORM THREAD LEAD | 0.196 INCHES NOMINAL |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM HELIX ANGLE | 6 DEG 20 MIN |
| WORM OUTSIDE DIAMETER | 0.625 INCHES NOMINAL |
| WORM PITCH DIAMETER | 0.562 INCHES NOMINAL |
| WORM THREAD SECTION LENGTH | 0.688 INCHES NOMINAL |
| WORM BODY LENGTH | 0.687 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| END SIMILARITY | NOT IDENTICAL |
| STRAIGHT UNTHREADED LENGTH | 0.562 INCHES NOMINAL FIRST END, FIRST PORTION |
| 0.688 INCHES NOMINAL FIRST END, SECOND PORTION |
| 0.812 INCHES NOMINAL SECOND END, FIRST PORTION |
| 0.260 INCHES NOMINAL SECOND END, SECOND PORTION |
| 2.087 INCHES NOMINAL SECOND END, FOURTH PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.344 INCHES NOMINAL FIRST END, FIRST PORTION |
| 0.312 INCHES NOMINAL FIRST END, SECOND PORTION |
| 0.391 INCHES NOMINAL SECOND END, FIRST PORTION |
| 0.3152 INCHES NOMINAL SECOND END, SECOND PORTION |
| 0.2498 INCHES NOMINAL SECOND END, FOURTH PORTION |
| SCREW THREAD SERIES DESIGNATOR | UNF SECOND END, THIRD PORTION |
| SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END, THIRD PORTION |
| THREAD LENGTH | 0.320 INCHES NOMINAL SECOND END, THIRD PORTION |
| OVERALL LENGTH | 5.688 INCHES NOMINAL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 19200 |
| DESIGN CONTROL REFERENCE | 8587413 |