|
|
|
National Stock Number:
3040-00-929-8509
Federal Supply Class:
3040
National Item Identification Number:
009298509
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 68-191-03113 | 81982 | HYDRO-AIRE AEROSPACE CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1870 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.700 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ST0071,COMP 17-4PH ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | OVERALL LENGTH | 5.508 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.613 INCHES MINIMUM AND 0.638 INCHES MAXIMUM | | SECOND END HOLE DEPTH | 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | SECOND END DIAMETER | 0.3120 INCHES MINIMUM AND 0.3130 INCHES MAXIMUM | | SECOND END STYLE | CROSS DRILLED HOLE AND INTERNALLY THREADED | | SECOND END HOLE DIAMETER | 0.0940 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM | | SECOND END INTERNAL THREAD LENGTH | 0.613 INCHES MINIMUM AND 0.638 INCHES MAXIMUM | | STEP QUANTITY | 9 |
|
|