|
|
|
National Stock Number:
3040-00-936-5823
Federal Supply Class:
3040
National Item Identification Number:
009365823
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 8626499 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5625 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.562 INCHES NOMINAL | | OVERALL LENGTH | 1.730 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 416 | | SECOND END HOLE DEPTH | 0.250 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0938 INCHES NOMINAL | | SECOND END DIAMETER | 0.2500 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.141 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SPECIAL FEATURES | HORIZANTALLY DRILLED HOLE,0.267 IN. DIA,0.500 IN. DP AT MAJOR DIA END OF SHAFT,ENTIRE HOLE,63.0,AGY MICROFINISH | | STEP QUANTITY | 5 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|