|
|
|
National Stock Number:
3040-00-939-6845
Federal Supply Class:
3040
National Item Identification Number:
009396845
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| SC-D-607202 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.0800 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL | | OVERALL LENGTH | 1.142 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225,TEMPER 6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | SPECIAL FEATURES | 1ST STEP ECCENTRIC TO CENTER LINE OF SHAFT 0.130 IN.,SLOTTED END THD LONGITUDIONALLY 0.138 IN. DIA 32 THDS PER IN. UNC CLASS 2B,0.250 IN. DEEP | | SECOND END DIAMETER | 0.3110 INCHES NOMINAL | | SECOND END SLOT DEPTH | 0.145 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.124 INCHES NOMINAL | | SECOND END STYLE | SLOTTED | | STEP QUANTITY | 4 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|