|
|
|
National Stock Number:
3040-00-941-2911
Federal Supply Class:
3040
National Item Identification Number:
009412911
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6250 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL | | OVERALL LENGTH | 1.500 INCHES MINIMUM AND 1.515 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 | | SECOND END DIAMETER | 0.2490 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.044 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.2300 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0290 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 3 |
|
|