|
|
|
National Stock Number:
3040-00-945-3284
Federal Supply Class:
3040
National Item Identification Number:
009453284
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 591716-3 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | AIR INLET CONTROL ACFT MODEL F111 PART NO. 704822L1 | | OVERALL LENGTH | 0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | HS178 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.0390 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SURFACE FINISH | 125.0 MICROINCHES |
|
|