|
|
|
National Stock Number:
3040-00-948-3529
Federal Supply Class:
3040
National Item Identification Number:
009483529
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 55A4D16-3 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 55A4D16-3 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 59A62B190 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 59A62B190 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3720 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | OVERALL LENGTH | 3.500 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | 3 DRILLED HOLES 0.123 IN. DIA MIN,0.128 IN. DIA MAX,0.031 IN. DP MIN,0.046 IN. DP MAX | | SECOND END DIAMETER | 0.3720 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.500 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.3520 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED |
|
|