|
|
|
National Stock Number:
3040-00-955-9613
Federal Supply Class:
3040
National Item Identification Number:
009559613
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 56435 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 12 | | FIRST END STYLE | SPLINED (STRAIGHT) | | FIRST END SPLINE LENGTH | 0.812 INCHES MINIMUM AND 0.820 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.5500 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | OVERALL LENGTH | 1.843 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5643,COMP 17-4PH ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | SECOND END DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.5973 INCHES MINIMUM AND 0.6085 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 11 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.6875 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.781 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | STEP QUANTITY | 4 |
|
|