|
|
|
National Stock Number:
3040-00-962-4460
Federal Supply Class:
3040
National Item Identification Number:
009624460
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 613036 | 62983 | EATON AEROSPACE, LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.865 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | VICKERS VS-1-1-6-3 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.188 INCHES NOMINAL | | SECOND END DIAMETER | 0.3970 INCHES MINIMUM AND 0.4030 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 1.140 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.8620 INCHES MINIMUM AND 0.8670 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.7070 INCHES MINIMUM AND 0.7170 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 16 | | SPECIAL FEATURES | COUNTERBORE FIRST END 1.312 IN. DEEP 0.375 IN. DIA; SECOND SET OF SPLINES LOCATED 0.5950 IN. FROM FIRST END,MINOR DIA 0.531 IN. MAJOR DIA 0.6465 IN,SPLINE LG 0.900 IN. SPLINE QTY 12; COUNTERBORE SECOND END 0.875 IN. DEEP 0.500 IN. DIA | | STEP QUANTITY | 4 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|