|
|
|
National Stock Number:
3040-00-979-8761
Federal Supply Class:
3040
National Item Identification Number:
009798761
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 209641 | 12603 | CLARK EQUIPMENT CO | | 209641 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | 209641 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7395 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.935 INCHES MINIMUM AND 0.940 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.3440 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.375 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | OVERALL LENGTH | 10.125 INCHES NOMINAL | | MATERIAL | MANGANESE | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL | | SECOND END DIAMETER | 0.7395 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM | | SECOND END STEP LENGTH | 0.875 INCHES NOMINAL | | SECOND END STYLE | TONGUE AND CROSS DRILLED HOLE | | SECOND END HOLE DEPTH | 0.406 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END TONGUE THICKNESS | 0.406 INCHES NOMINAL | | SECOND END TONGUE WIDTH | 0.739 INCHES MINIMUM AND 0.740 INCHES MAXIMUM | | SPECIAL FEATURES | SHAFT HAS TWO NOTCHES,0.190 IN. R W/FLAT BETWEEN NOTCHES,0.059 IN. DEEP | | SURFACE FINISH | 20.0 MICROINCHES |
|
|