|
|
|
National Stock Number:
3040-00-980-2285
Federal Supply Class:
3040
National Item Identification Number:
009802285
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 102-15-1 | 84760 | STANADYNE CORPORATION | | 10210 | 84760 | STANADYNE CORPORATION | | 687003C91 | 0SAT8 | KOMATSU AMERICA CORP. | | 304715R1 | 31007 | NAVISTAR INTL CORP | | 10213 | 84760 | STANADYNE CORPORATION | | 304715R1 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | A44710 | 10988 | CNH INDUSTRIAL AMERICA LLC | | G47113 | 10988 | CNH INDUSTRIAL AMERICA LLC | | 687003C91 | 29510 | KOMATSU AMERICAN INTL CO | | R36538 | 75160 | DEERE & CO | | R36538 | 75755 | DEERE & COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL | | FIRST END DIAMETER | 0.5205 INCHES MINIMUM AND 0.5250 INCHES MAXIMUM | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM | | OVERALL LENGTH | 5.274 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.7750 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM | | SECOND END STEP LENGTH | 0.281 INCHES NOMINAL | | SECOND END STYLE | TONGUE ROUNDED ENDS | | SECOND END TONGUE THICKNESS | 0.309 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | SECOND END TONGUE WIDTH | 0.775 INCHES MINIMUM AND 0.807 INCHES MAXIMUM | | SPECIAL FEATURES | FIRST END BORE DRILL B(.236-243)TO DIM SHOWN.CSINK .300-320 DIA BY 60 DEG INCL ANGLE-RM .262-268 DIA 1.670-1.700 DP-RM .279-283 DIA BY 1.365-1.395 DP-CONC W/.807 DIA W/IN .010 F.I.R.;SECOND END CIR GROOVED 0.780 DISTANCE FROM END TO GROOVE,0.500 GROOVE W,0.420 GROOVE DIA;SECOND END OPTIONAL CTR DRILL HOLE 0.110 DIA; SEC0ND END REQD INT DRILL HOLE 0.093 DIA,0.250 DISTANCE BTWN HOLE CTRS | | STEP QUANTITY | 7 | | SURFACE FINISH | 20.0 MICROINCHES |
|
|