|
|
|
National Stock Number:
3040-00-983-3917
Federal Supply Class:
3040
National Item Identification Number:
009833917
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 10919925 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 2520009833917 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 2.500 INCHES NOMINAL | | LINK END THICKNESS | 0.296 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | LINK END HOLE DIAMETER | 0.281 INCHES NOMINAL | | MAJOR DIAMETER | 0.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-10005, C1025 TO C1030 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MINOR DIAMETER | 0.875 INCHES NOMINAL | | SHAFT END THICKNESS | 0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | OFFSET HEIGHT: 0.265 IN. NOMINAL | | SPLINE QUANTITY | 27 | | SURFACE TREATMENT | PHOSPHATE |
|
|