| WORM PRESSURE ANGLE IN DEG | 20.000 |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM THREAD LEAD | 0.750 INCHES NOMINAL |
| WORM THREAD QUANTITY | 2 |
| WORM THREAD SECTION LENGTH | 0.750 INCHES NOMINAL |
| STRAIGHT UNTHREADED LENGTH | 0.214 INCHES NOMINAL FIRST END, FIRST PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.310 INCHES NOMINAL FIRST END, FIRST PORTION |
| TEETH HARDNESS RATING | 60.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| INVOLUTE SPLINE LENGTH | 0.310 INCHES NOMINAL SECOND END, FIRST PORTION |
| INVOLUTE SPLINE PITCH DIAMETER | 0.2470 INCHES NOMINAL SECOND END, FIRST PORTION |
| INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 30.0 FIRST END, FIRST PORTION |
| INVOLUTE SPLINE QUANTITY | 9 FIRST END, FIRST PORTION |
| MATERIAL | STEEL |
| III FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,LINEAR,ACFT |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL LENGTH | 1.939 INCHES NOMINAL |
| SHAFT HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| WORM BODY LENGTH | 1.134 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| WORM HELIX ANGLE | 40 DEG |
| WORM OUTSIDE DIAMETER | 0.567 INCHES NOMINAL |
| WORM PITCH DIAMETER | 0.500 INCHES NOMINAL |