|
|
|
National Stock Number:
3040-00-986-1850
Federal Supply Class:
3040
National Item Identification Number:
009861850
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| C0HD1128 | 53496 | SCHRAMM, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END STYLE | TAPERED WITH FLAT | | FIRST END TAPER LENGTH | 0.063 INCHES NOMINAL | | FIRST END TAPER MAJOR DIAMETER | 0.8580 INCHES MINIMUM AND 0.8590 INCHES MAXIMUM | | OVERALL LENGTH | 13.578 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD NO. 66,AISI C1015 OR SAE 1015 FED STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.8580 INCHES MINIMUM AND 0.8590 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.109 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.7190 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1410 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | WITH TAPER NOT FLAT |
|
|