|
|
|
National Stock Number:
3040-00-987-3530
Federal Supply Class:
3040
National Item Identification Number:
009873530
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 553-1446-002 | 01351 | SOUTHERN GEAR & MACHINE INC | | 553-1446-002 | 13499 | ROCKWELL COLLINS, INC. | | 553-1446-002 | 29440 | W. M. BERG INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.232 INCHES NOMINAL | | FIRST END DIAMETER | 0.1840 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.1250 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0400 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 1.594 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,2024-T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | SECOND END DISTANCE FROM END TO GROOVE | 0.034 INCHES NOMINAL | | SECOND END DIAMETER | 0.1840 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.1470 INCHES MINIMUM AND 0.1490 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0280 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED |
|
|