|
|
|
National Stock Number:
3040-00-993-5982
Federal Supply Class:
3040
National Item Identification Number:
009935982
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 2042143-3 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | L340005063 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.379 INCHES NOMINAL | | FIRST END DIAMETER | 0.1873 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.1500 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0350 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 0.925 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-753,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 416 | | SECOND END DIAMETER | 0.1873 INCHES NOMINAL | | SECOND END PITCH DIAMETER | 0.1750 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 45.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.253 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.1875 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.1625 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 14 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SURFACE FINISH | 32.0 MICROINCHES |
|
|