|
|
|
National Stock Number:
3040-01-052-6236
Federal Supply Class:
3040
National Item Identification Number:
010526236
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 7045782 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | J3209 | 80837 | KYSOR/WESTRAN CORP AUSTIN TRAILER DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | EXTERNAL KEYWAY LENGTH | 0.250 INCHES NOMINAL FIRST END | | FIRST END HOLE DEPTH | 1.000 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.2500 INCHES NOMINAL | | FIRST END DIAMETER | 1.0000 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 2.000 INCHES NOMINAL | | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 1.500 INCHES NOMINAL | | FIRST END STYLE | WOODRUFF KEYWAY AND CROSS DRILLED | | FIRST END KEYWAY WIDTH | 0.2500 INCHES NOMINAL | | OVERALL LENGTH | 10.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1015 OR STEEL COMP 1025 | | SPECIAL FEATURES | 1ST DRILLED HOLE ON 2ND 0.390 IN. DIA | | SECOND END DIAMETER | 1.0000 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN HOLE CENTERS | 3.781 INCHES NOMINAL | | SECOND END ANGLE BETWEEN HOLES | 180.0 DEGREES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL | | SECOND END HOLE DEPTH | 1.000 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.3750 INCHES NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES |
|
|