|
|
|
National Stock Number:
3040-01-053-0568
Federal Supply Class:
3040
National Item Identification Number:
010530568
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 41401 | 06442 | MIRION TECHNOLOGIES (CANBERRA), INC. | | B41401 | 06442 | MIRION TECHNOLOGIES (CANBERRA), INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1870 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.187 INCHES NOMINAL | | OVERALL LENGTH | 3.938 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END ANGLE BETWEEN FLATS | 90.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.0937 INCHES NOMINAL | | SECOND END STEP LENGTH | 0.500 INCHES NOMINAL | | SECOND END STYLE | TWO FLATS | | STEP QUANTITY | 2 |
|
|