|
|
|
National Stock Number:
3040-01-054-2919
Federal Supply Class:
3040
National Item Identification Number:
010542919
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2499 INCHES MINIMUM AND 0.2502 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | OVERALL LENGTH | 4.183 INCHES MINIMUM AND 4.193 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.4360 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.406 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.3390 INCHES MINIMUM AND 0.3490 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.2090 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 4 |
|
|