|
|
|
National Stock Number:
3040-01-054-4098
Federal Supply Class:
3040
National Item Identification Number:
010544098
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1851953 | 077S2 | DELCO REMY AMERICA INC | | 1851953 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.3490 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0380 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.050 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 1.650 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.5000 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.125 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.4190 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0950 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 3 |
|
|