|
|
|
National Stock Number:
3040-01-079-8343
Federal Supply Class:
3040
National Item Identification Number:
010798343
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 15078-B | 27046 | PROPULSION SYSTEMS, INC. |
|
Techincal Specification:
| BORE DIAMETER | 1.938 INCHES NOMINAL | | BORE LENGTH | 0.969 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 3.063 INCHES NOMINAL | | FEATURES PROVIDED | KEYWAY AND LINK END THREADED HOLE | | KEYWAY WIDTH | 0.625 INCHES NOMINAL | | KEYWAY LENGTH | 0.969 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.312 INCHES NOMINAL | | LINK END THICKNESS | 0.375 INCHES NOMINAL | | OVERALL WIDTH | 5.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4130 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SCREW THREAD SERIES DESIGNATOR | UNF | | SHAFT END THICKNESS | 0.967 INCHES NOMINAL | | SHAFT SECURING METHOD | KEYWAY | | SPECIAL FEATURES | ITEM IS SPECIAL LEVER ON BASE PART OF GEAR SECTOR,SPUR AND PART NUMBER15079A ATTACHES TO IT; OFFSET HEIGHT: 0.594 IN. NOMINAL | | STYLE DESIGNATOR | ONE HOLE TONGUE LINK END, SECURING HOLE SHAFT END | | SURFACE TREATMENT | CHROMATE | | THREAD LENGTH | 0.375 INCHES NOMINAL | | THREAD SIZE | 5/16-24 |
|
|