|
|
|
National Stock Number:
3040-01-085-9335
Federal Supply Class:
3040
National Item Identification Number:
010859335
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 19AS508 | 45152 | OSHKOSH CORP | | 19AS508 | 75Q65 | OSHKOSH DEFENSE LLC | | BE-21592 | 28158 | HME, INC. | | BE-21592-3 | 28158 | HME, INC. | | BE-21592-3 | 6N039 | HENDRICKSON USA LLC |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 1.813 INCHES NOMINAL | | FIRST END DIAMETER | 1.8750 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 2.000 INCHES NOMINAL | | MATERIAL | STEEL | | OVERALL LENGTH | 12.625 INCHES NOMINAL | | SPECIAL FEATURES | BOTH ENDS 0.250 IN. DIA TWO CROSS DRILLED HOLES;GROOVE LOCATED 2.125 IN. FROM EA END,0.188 IN. GROOVE W,1.688 IN. GROOVE DIA | | STEP QUANTITY | 3 |
|
|