|
|
|
National Stock Number:
3040-01-125-6924
Federal Supply Class:
3040
National Item Identification Number:
011256924
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 65265-02012-101 | 15152 | PCX AEROSYSTEMS-MANCHESTER, LLC | | 65265-02012-101 | 21540 | PRECISION GEAR INDUSTRIES LLC | | 65265-02012-101 | 58078 | AIRTRONICS, LLC | | ES3-DWG-1770 | 6LKA3 | ES3 PRIME LOGISTICS GROUP, INC. | | 65265-02012-101 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 1.181 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1360 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.0365 INCHES MINIMUM AND 1.0390 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.9100 INCHES MINIMUM AND 0.9200 INCHES MAXIMUM | | FIRST END STYLE | CROSS DRILLED HOLE AND SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 1.122 INCHES MINIMUM AND 1.123 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 25.630 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED HOLE AND SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 1.250 INCHES NOMINAL | | SPECIAL FEATURES | FLIGHT SAFETY CRITICAL | | STEP QUANTITY | 5 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|