|
|
|
National Stock Number:
3040-01-125-7584
Federal Supply Class:
3040
National Item Identification Number:
011257584
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10106814 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 182218-1 | 71791 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.200 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 17 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,ROTARY-CANOPY | | LARGEST STEP DIAMETER | 0.372 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844,CLASS,COND E MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 5.692 INCHES MINIMUM AND 5.697 INCHES MAXIMUM | | STEP QUANTITY | 5 | | SURFACE FINISH | 66.0 MICROINCHES |
|
|