|
|
|
National Stock Number:
3040-01-127-5161
Federal Supply Class:
3040
National Item Identification Number:
011275161
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 100603 | 0WE82 | AMERICAN TURBO SYSTEMS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1860 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM | | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.528 INCHES MINIMUM AND 1.538 INCHES MAXIMUM | | FIRST END STYLE | THREADED CROSS DRILLED (THRU HOLE) | | LARGEST STEP DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | OVERALL LENGTH | 4.400 INCHES MINIMUM AND 4.420 INCHES MAXIMUM | | MATERIAL | STEEL COMP 304 | | SECOND END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.190 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SECOND END STYLE | THREADED CROSS DRILLED (THRU HOLE) | | STEP QUANTITY | 2 | | SPECIAL FEATURES | THD HOLES ARE AT 45 DEG ANGLE |
|
|