|
|
|
National Stock Number:
3040-01-133-4067
Federal Supply Class:
3040
National Item Identification Number:
011334067
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 709-4684876 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 709-4684876 ITEM 12 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 87832-1605 | 96169 | ELECTRIC BOAT CORPORATION | | 87832-1605ITEM12 | 96169 | ELECTRIC BOAT CORPORATION | | 87832-1605 PC 12 | 9G619 | HONEMATIC MACHINE CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.4860 INCHES MINIMUM AND 1.4960 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.562 INCHES NOMINAL | | OVERALL LENGTH | 10.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-1222,TYPE 1,SYN B7 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | STEP QUANTITY | 11 |
|
|