|
|
|
National Stock Number:
3040-01-133-5422
Federal Supply Class:
3040
National Item Identification Number:
011335422
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 10085864 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 12299093 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.750 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM | | LINK END THICKNESS | 0.250 INCHES NOMINAL | | MAJOR DIAMETER | 0.521 INCHES NOMINAL | | OVERALL WIDTH | 1.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | MINOR DIAMETER | 0.448 INCHES MINIMUM AND 0.453 INCHES MAXIMUM | | SHAFT SECURING METHOD | SPLINE | | SHAFT END THICKNESS | 0.633 INCHES NOMINAL | | SPECIAL FEATURES | OFFSET HEIGHT: 0.380 IN. NOMINAL | | SPLINE QUANTITY | 15 | | STYLE DESIGNATOR | TWO HOLES LINK END, CLAMP TYPE SHAFT END |
|
|