|
|
|
National Stock Number:
3040-01-137-1841
Federal Supply Class:
3040
National Item Identification Number:
011371841
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 973886-01 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 973886-01 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | RY-173734 ITEM 3 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | RY-173734 ITEM 3 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | RY-173734 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| LARGEST STEP DIAMETER | 1.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | NICKEL ALLOY 400 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 26.000 INCHES NOMINAL |
|
|