|
|
|
National Stock Number:
3040-01-140-3194
Federal Supply Class:
3040
National Item Identification Number:
011403194
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 10106912 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 2040781-1 | 0ZWK8 | MOOG INC. | | 2040781-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.5500 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 20 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FIRST END PITCH DIAMETER | 0.6250 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.5500 INCHES MINIMUM AND 0.5800 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.6560 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.5700 INCHES NOMINAL | | FSC APPLICATION DATA | DRIVE,MECHANICAL,FLAP,LE,WING | | OVERALL LENGTH | 2.045 INCHES MINIMUM AND 2.055 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6411 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SURFACE FINISH | 63.0 MICROINCHES |
|
|