|
|
|
National Stock Number:
3040-01-140-3832
Federal Supply Class:
3040
National Item Identification Number:
011403832
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10106917 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3014039-1 | 82106 | PARKER-HANNIFIN CORPORATION | | 3014039-1 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.3738 INCHES MINIMUM AND 0.3743 INCHES MAXIMUM | | FIRST END INTERNAL THREAD LENGTH | 0.210 INCHES MINIMUM | | FIRST END STYLE | INTERNAL THREADED | | LARGEST STEP DIAMETER | 0.390 INCHES NOMINAL | | OVERALL LENGTH | 1.760 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 420 | | STEP QUANTITY | 3 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|