|
|
|
National Stock Number:
3040-01-141-8613
Federal Supply Class:
3040
National Item Identification Number:
011418613
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5006515 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.2500 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.2000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 1.062 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.2670 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.0990 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 24 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 2.010 INCHES NOMINAL | | MATERIAL | STEEL,AMS 6470 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 7.303 INCHES NOMINAL | | SPECIAL FEATURES | BORE IN FIRST END 2.375 IN. LG,0.625 IN.DIA; SECOND END BORE 0.688 IN.LG,0.375 IN.DIA | | SECOND END DIAMETER | 0.9380 INCHES NOMINAL | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.312 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.7920 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.6670 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 18 | | STEP QUANTITY | 5 |
|
|