|
|
|
National Stock Number:
3040-01-142-6220
Federal Supply Class:
3040
National Item Identification Number:
011426220
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 2617115 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| BORE DIAMETER | 0.285 INCHES NOMINAL | | BORE LENGTH | 0.594 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 3.740 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.062 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.164 INCHES NOMINAL | | LINK END THICKNESS | 0.840 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766, CLASS 304, COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SHAFT END THICKNESS | 0.594 INCHES NOMINAL | | SPECIAL FEATURES | HAS SMALL TONGUE ON BOTTOM SIDE,HAS 0.250 IN DIA HOLE,HOLE LOCATION IS 0.840 IN INSIDE,CENTER TO CENTER WITH SHAFT HOLE,0.875 IN BELOW SHAFT HOLE; OFFSET HEIGHT: 0.276 IN. NOMINAL | | STYLE DESIGNATOR | CLEVIS LINK END, SECURING HOLE(S) SHAFT END |
|
|