|
|
|
National Stock Number:
3040-01-143-1314
Federal Supply Class:
3040
National Item Identification Number:
011431314
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3-P-686 | 11757 | PARKER HANNIFIN CORPORATION | | 802CX545 | 45152 | OSHKOSH CORP | | 802CX545 | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8750 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.750 INCHES NOMINAL | | OVERALL LENGTH | 7.750 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DISTANCE FROM END TO GROOVE | 1.969 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.2031 INCHES MINIMUM AND 1.2900 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.1050 INCHES MINIMUM AND 0.1406 INCHES MAXIMUM | | SECOND END DIAMETER | 1.3750 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.188 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN SECOND AND THIRD GROOVE CENTERS | 0.594 INCHES NOMINAL | | SECOND END STYLE | THREE CIRCULAR GROOVES | | STEP QUANTITY | 5 |
|
|