|
|
|
National Stock Number:
3040-01-143-1850
Federal Supply Class:
3040
National Item Identification Number:
011431850
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10106926 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 6321-0046-01 | 17472 | EATON AEROSPACE LLC |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 36 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FIRST END PITCH DIAMETER | 0.4986 INCHES MINIMUM AND 0.4996 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 0.500 INCHES NOMINAL | | FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,ROTARY-CANOPY | | LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL | | OVERALL LENGTH | 7.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8690 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | STEP QUANTITY | 3 |
|
|