|
|
|
National Stock Number:
3040-01-143-8511
Federal Supply Class:
3040
National Item Identification Number:
011438511
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 769211-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.2495 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.1890 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0700 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.3300 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.3300 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | LARGEST STEP DIAMETER | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 2.615 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | STEP QUANTITY | 4 |
|
|