3030-01-144-6356 BELT,FLAT Index 5895-01-144-6359 PRESELECTOR

National Stock Number:
3040-01-144-6357

Federal Supply Class:
3040

National Item Identification Number:
011446357

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
131527045152OSHKOSH CORP
131527075Q65OSHKOSH DEFENSE LLC


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DIAMETER2.4900 INCHES MINIMUM AND 2.4950 INCHES MAXIMUM
FIRST END SPLINE LENGTH1.000 INCHES NOMINAL
FIRST END SPLINE MAJOR DIAMETER2.4900 INCHES MINIMUM AND 2.4950 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER2.1900 INCHES MINIMUM AND 2.2020 INCHES MAXIMUM
FIRST END SPLINE QUANTITY16
FIRST END STYLESPLINED (STRAIGHT)
LARGEST STEP DIAMETER4.462 INCHES MINIMUM AND 4.467 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 8620-H ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 8620H
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH20.140 INCHES NOMINAL
SPECIAL FEATURESBORE LG OF SHAFT 0.440 IN. DIA W/INT THD ON BOTH ENDS;FIRST END HAS TWO INT THD HOLES 0.750 IN DP ON 1.380 IN. BOLT CIR DIA;SECOND END HAS TWO INT THD HOLES 0.750 IN. DP ON 1.500 IN. BOLT CIR DIA
SECOND END DIAMETER2.4930 INCHES MINIMUM AND 2.4950 INCHES MAXIMUM
SECOND END HOLE DEPTH0.807 INCHES NOMINAL
SECOND END HOLE DIAMETER0.1200 INCHES NOMINAL
SECOND END DISTANCE FROM HOLE CENTER TO END3.130 INCHES NOMINAL
SECOND END STYLECROSS DRILLED HOLE AND SPLINED (STRAIGHT)
SECOND END SPLINE LENGTH2.940 INCHES NOMINAL
SECOND END SPLINE MAJOR DIAMETER2.4390 INCHES MINIMUM AND 2.4950 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER2.1390 INCHES MINIMUM AND 2.1440 INCHES MAXIMUM
SECOND END SPLINE QUANTITY10
STEP QUANTITY7
SURFACE FINISH16.0 MICROINCHES


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us