|
|
|
National Stock Number:
3040-01-145-2526
Federal Supply Class:
3040
National Item Identification Number:
011452526
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10106933 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 6321-0089-03 | 17472 | EATON AEROSPACE LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.1870 INCHES NOMINAL | | FIRST END FLAT DEPTH | 0.4750 INCHES NOMINAL | | FIRST END FLAT LENGTH | 0.600 INCHES NOMINAL | | FIRST END STYLE | FLATTED | | FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,ROTARY CANOPY | | LARGEST STEP DIAMETER | 1.187 INCHES NOMINAL | | OVERALL LENGTH | 5.059 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8690 MIL SPEC SINGLE MATERIAL RESPONSE | | SECOND END DIAMETER | 0.5000 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 15 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.3730 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM | | SECOND END SPLINE LENGTH | 0.620 INCHES NOMINAL | | STEP QUANTITY | 3 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|